Search for: All records

Abstract Component mode mistuning (CMM) is a well-known, well documented reduced order modeling technique that effectively models small variations in blade-to-blade stiffness for bladed disks. In practice, bladed disks always have variations, referred to as mistuning, and are a focus of a large amount of research. One element that is commonly ignored from small mistuning implementations is the variation within the blade-to-blade damping values. This work seeks to better understand the effects of damping mistuning by utilizing both structural and proportional damping formulations. This work builds from previous work that implemented structural damping mistuning reduced order models formulated based on CMM. A similar derivation was used to create reduced order models with a proportional damping formulation. The damping and stiffness mistuning values investigated in this study were derived using measured blade natural frequencies and damping ratios from high-speed rotating experiments on freestanding blades. The two separate damping formulations that are presented give very similar results, enabling the user to select their preferred method for a given application. A key parameter investigated in this work is the significance of blade-to-blade coupling. The blade-to-blade coupling study investigates how the level of coupling impacts damping mistuning effects versus applying average damping to the bladed disk model. Also, the interaction of stiffness and damping mistuning is studied. Monte Carlo simulations were carried out to determine amplification factors, or the ratio of mistuned blade responses to tuned blade responses, for various mistuning levels and patterns. 

There has been an extensive amount of work developing reduced-order models (ROMs) for bladed disks using single-sector models and a cyclic analysis. Several ROMs currently exist to accurately model a bladed disk with under-platform dampers. To better predict the complex nonlinear response of a system with under-platform dampers, this work demonstrates how two linear models can determine bounds for the nonlinear response. The two cases explored are where the under-platform damper is completely stuck and also where the damper slides without friction. This work utilizes the component mode mistuning method to model small mistuning and a parametric ROM method to capture changes in properties due to rotational speed effects. Previously, these ROM methodologies have modeled freestanding bladed disk systems. To evaluate the ROM in predicting the bounds, blade tip amplitudes from the models are compared with high-speed rotating experiments conducted in a large, evacuated vacuum tank. The experimental data were collected during testing using strain gauges and laser blade tip timing probes. The blade amplitudes of the tip timing data, strain gauge data, and computational simulations are compared to determine the effectiveness of the simplified linear analysis in bounding the nonlinear response of the physical system.